SkillPedia Skills Encyclopedia
中文 EN
Today's updates 2026-11-17 UTC

No new commits yet today

Open the update feed

Development & Engineering · Frontier

Integration Test

Putting several modules that each work on their own together and checking whether they work well as a group. Unit tests prove a part works alone; integration tests answer whether it still works once assembled.

Development & Engineering Frontier Appears 4571 times across the site, in 1616 entries 361 characters about 1 min read 55 views

TL;DRIn 30 seconds

  1. Take several modules that each work, put them together and check whether they cooperate.
  2. It hunts exactly the problems that only appear once assembled: interfaces, data formats, call order.
  3. It's slow and sensitive to its environment — when it goes red, check the environment before calling the feature broken.

OverviewIn detail

An integration test puts several modules that each already work on their own together and checks whether they work as a group. It tests the connections between them, not whether each part is any good. Unit tests prove a single part works alone; integration tests answer a different question: does it still work once assembled.

Unit tests on their own are not enough, because interfaces, data formats and call order are exactly the things that only show up once you put the pieces together. Two parts can each be fine and still fall apart when wired up, because one assumes the date arrives as A and the other hands over B. Problems like that are invisible in each side's own checks and only surface when they are actually connected. Every gear can be good and the machine still will not turn if the teeth do not mesh.

The usual approach is to run it in an environment as close to real as possible — a genuine database rather than a stand-in — so the result means something. Seeing an integration test pass is like hearing that the car is not just made of certified parts but has actually been driven.

The difference from a regression test is the question it asks. An integration test cares whether the assembly works; a regression test cares whether this change broke something that used to work. A single regression run may be running the whole integration suite, but it is asking a different question.

Be patient with it: integration tests are slow and fragile, and changing an environment or a setting can make them fail. When they go red, check first whether the environment is ready before concluding the feature is broken — do not rush in and start changing code. To get value out of them, keep the environment as fixed as you can. Swap in a different configuration every run and you will never be able to explain a failure.

MythsCommon misunderstandings

  • Thinking passing unit tests means you don't need integration tests Two parts can each be faultless and still fall apart when joined, because a format doesn't match
  • Thinking a failed integration test means the feature is broken A different environment or a changed setting can fail it too — confirm the environment is ready first
  • Thinking it doesn't matter which test environment you use Change the configuration every run and you'll never be able to explain a failure

In practiceWhere you will meet it

  • Once several modules are written, connect them and run through whether they line up
  • When tests go red, first confirm the database and environment are actually ready
  • Run the full flow in something close to production before you ship

SummaryThe key points

  • Checks whether several modules cooperate once put together
  • Targets interfaces, data formats and call order — problems that only appear when assembled
  • Often runs against something close to the real thing, such as a live database
  • Slow and environment-sensitive: when it goes red, diagnose the environment first

FAQ

What does Integration Test mean?

Take several modules that each work, put them together and check whether they cooperate.It hunts exactly the problems that only appear once assembled: interfaces, data formats, call order.It's slow and sensitive to its environment — when it goes red, check the environment before calling the feature broken.

Where will I run into Integration Test?

Once several modules are written, connect them and run through whether they line up;When tests go red, first confirm the database and environment are actually ready;Run the full flow in something close to production before you ship。

What do people most often get wrong about Integration Test?

Thinking passing unit tests means you don't need integration tests — but Two parts can each be faultless and still fall apart when joined, because a format doesn't match;Thinking a failed integration test means the feature is broken — but A different environment or a changed setting can fail it too — confirm the environment is ready first。

What are the key points about Integration Test?

Checks whether several modules cooperate once put together;Targets interfaces, data formats and call order — problems that only appear when assembled;Often runs against something close to the real thing, such as a live database;Slow and environment-sensitive: when it goes red, diagnose the environment first。

Common pitfalls When an integration test fails, confirm the environment is ready first — diving in to change code can break the parts that were fine.

Also written asYou may also see it written as

integration testing integration tests

These are all the same concept — the same thing, however it is written in a skill description. Do not mistake different spellings for different ideas.

Entry 83 of 186 · All entries

Keep readingRelated reading

Where to go nextExplore more

Back to the skills themselves

Most of the concepts covered here come from skills that install into your AI client with a single command.